Technical data

Page 9 of 15
OPERATION INSTRUCTIONS
COMBUSTIBLE
• Your appliance has been design to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE OIL
OR ANY OIL CONTAINING GASOLINE. Drolet Stoves & Fireplaces declines all responsibility regarding
damage cause by using other combustibles.
• Make sure to use oil without impurities which may plug filters and valve’s orifice. Impurities will only give an
improper combustion.
LIGHTING
BEFORE LIGHTING
• Make sure that :
 The tank is full;
 The isolating valve is open;
• See that the (3) rings are in the right
position. Each of them are stamped A, B
and C (figure 13).
• Make sure that the flow regulating handle is
in the « 0 » position (figure 14B).
• If it’s not already done, arm down the valve’s
lever located behind the appliance (figure
14A).
• Wait for the valve to fill up and let the level
stabilize.
• BEFORE ATTEMPTING TO LIGHT YOUR
APPLIANCE, MAKE SURE THAT THE
FLOW REGULATING HANDLE IS IN THE
0 POSITION.
Figure 13: BURNER RINGS POSITION
Figure 14B: CONSTANT LEVEL FLOW
CONTROL VALVE (CARBURATOR)
Figure 14A: ARMING / DESARMING FLOW CONTROL
VALVE (CARBURATOR).