Product Manual

HeatMax II Furnace Installation and Operation Manual
31
7.2 Installation and connection of the “RTD” thermal probe
IMPORTANT: The proper positioning of the “RTD” thermal probe is essential to the proper
functioning of the furnace. Install it in the opening provided for this purpose on the start-off
plenum.
With the plenum extension (A) and the plenum (B)
With 6 self-taping screws
(D), install the metal
plate on the plenum (B)
to block-off the 3 holes.
Make sure the notch
towards the bottom.
Install the RTP probe in
the plenum extension
(A).
Secure the RTD probe
with the two screws
provided (C).
Connect the RTD probe
on the furnace with the
connection.