Product Manual

HeatMax II Furnace Installation and Operation Manual

5.3 Installation of the assembled plenum on the furnace

Identify the right side of the plenum, it is

provided with holes for the installation of the

“RTD” thermal probe.

Also, 5 holes are aligned with the fold of the

top of the furnace on the right side and

three holes on the other sides. This allows

you to secure the plenum properly.

Install the assembly on the furnace, taking

care to insert the 4 fold on top of the

furnace inside the plenum.

Using 14 screws, secure the plenum to the

furnace.