Product Manual

HeatPack Furnace Installation and Operation Manual
7
2 Regulations and safety warnings covering installation
2.1 Regulations covering furnace installation
WARNING
FOLLOW LOCAL CODES IF IN DOUBT, CONTACT YOUR LOCAL HEATING
APPLIANCE RETAILER, YOUR MUNICIPALITY OR YOUR FIRE DEPARTMENT.
Installation must be made in accordance with the following standards :
Canada
 CSA-B365 «Installation code for solid-fuel-burning appliances and
equipment».
 CSA C22.1 «Canadian electrical code».
United-States
 NFPA 90B «Standard for the installation of warm air heating and air-
conditioning systems».
 NFPA 70 «National Electrical Code».
2.1.1 Cautions and warnings covering installation
 THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE
APPLIANCE ALWAYS OVERRIDES THE INFORMATION PUBLISHED, IN ANY
OTHER MEDIA (OWNER’S MANUAL, CATALOGUES, FLYERS, MAGAZINES
AND/OR WEB SITES).
 AIR DUCTS SERVING A GARAGE SHOULD NOT BE CONNECTED TO OTHER
PARTS OF A HOUSE AND THE DUCTING SERVING A HOUSE SHOULD NOT BE
CONNECTED TO A GARAGE.
 THIS STOVE HAS BEEN DEVELOPED AND BUILT FOR RESIDENTIAL
SUPPLEMENTARY HEAT SOURCE. COMMERCIAL AND INDUSTRIAL USE IS
PROHIBITED AND WILL VOID THE WARRANTY.
 MIXING OF CHIMNEY COMPONENTS FROM DIFFERENT SOURCES OR
MODIFYING FURNACE COMPONENTS MAY RESULT IN HAZARDOUS
CONDTIONS.
 ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN
WRITING BY THE TESTING AUTHORITY VIOLATES CSA B365 (CANADA), AND
NFPA 90B (USA).
 CONNECT THIS FURNACE ONLY TO A LISTED UL 103 HT OR ULC S629
FACTORY-BUILT CHIMNEY FOR USE WITH SOLID FUEL OR TO A LINED
MASONRY CHIMNEY CONFORMING TO NATIONAL AND LOCAL BUILDING
CODES.
 IF REQUIRED, A FRESH AIR RETURN ADAPTOR KIT (SOLD SEPARATLY) CAN
BE INSTALLED TO SUPPLY COMBUSTION AIR TO THE ROOM OR SPACE.