Product Manual

HeatPack Furnace Installation and Operation Manual

5. Dirt in the central exchanger (2) will be removed from the front or the rear of the

furnace. If you remove dirt from the central exchange to the back of the furnace,

remove the black pipe connector in order to dispose of the dirt.

6. Then, check that the baffle is clear of ash and reposition it in its original position

towards the back of the combustion chamber.

7. Close the exchanger access door and secure it using the washer (C) and wing nut (B).

8. If you have performed maintenance from the back part of the furnace, reinstall the

black pipe connector and secure it with three screws.