Product Manual

HeatPack Furnace Installation and Operation Manual

9.2 Installation and connection of the “RTD” thermal probe

IMPORTANT

THE PROPER POSITIONING OF THE “RTD” THERMAL PROBE IS ESSENTIAL TO

THE PROPER FUNCTIONING OF THE FURNACE. INSTALL IT IN THE OPENING

PROVIDED FOR THIS PURPOSE ON THE START-OFF PLENUM.

9.2.1 With plenum (B) only

Step 1. Pre drill the four plate holes (L) on the plenum with a 1/8" drill bit. Using 4 self-

drilling screws (D), install the plate (L) supplied with the furnace on the plenum (B). Make

sure to have the notch on the plate up.

Step 2. Install the bottom of the RTD probe support (M) on the furnace using 2 screws

(C).