Product Manual

HeatPack Furnace Installation and Operation Manual
23
7.2.4 Installing the start-off adapters
After choosing your output configuration, you can now install the start-off adapters. They
can be found in the boxes 1 & 2 of the furnace. Each box contains 5 adapters.
Do the following to install the start-off adapters.
WARNING
USE GLOVES TO COMPLETE THE FOLLOWING STEPS BECAUSE THE START-
OFF ADAPTERS CAN BE SHARP.
Step 1. Cut a notch in the flange of
adapter and slightly fold down one side of
the flange to facilitate installation.
Step 2. Align the notch previously made
on the adapter with the one of the hot air
outlet on the plenum, and then turn the
adapter until the flange is completely
inserted and rotates freely. Repeat the
above procedure for the other adapters