Product Manual

HeatPack Furnace Installation and Operation Manual

4.3 Non-authorized installation configuration

4.3.1 Non-authorized installation configuration in Canada and United States

 The hot air distribution duct of the

furnace (A) must not be installed in the

air return duct of the furnace (B).

 The hot air distribution duct (B) must not

be installed in the air return duct of the

furnace (A).

5 Positioning the unit and clearances to combustible

materials

To reduce the risk of vibration, the furnace must be leveled in both directions and

supported evenly to ensure stability.

5.1 Unit positioning

The furnace must be installed where outside air supply will be sufficient for proper

combustion. If required, a fresh air return adaptor kit (sold separatly) can be installed to

supply combustion air to the room or space.

The furnace must be positioned so that the flue pipe is as short as possible. Minimize the

use of 90° elbows.

The owner must ensure a proper installation to allow a safe operation of the appliance.

The owner must ensure cleanliness of the room in the event of negative pressure or

temporarily negative pressure.

5.2 Certification label

WARNING

THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE WITH THE

INSTRUCTIONS ON THE CERTIFICATION LABEL APPLIED ON THE UNIT.