Product Manual

Black Stag Installation and Operation Manual
49
Note that secondary air tubes (B) can be replaced without removing the baffle board (A).
HOW TO REMOVE AND REPLACE THE BAFFLES OF THE BYPASS DAMPER
REGISTRE
Follow the steps to remove the secondary air tubes (B) and the main baffle (A) as
explained above. Remove the bypass baffles (C) as illustrated.
Important Notes:
The air tubes are identified for placement as follows:
Model Type of tube
Black Stag
Front ► 30 holes of 0.147"
Middle front ► 30 holes of 0.152’’
Middle rear ► 20 holes of 0.128’’
Rear ► 15 holes of 0.128’’