User Guide

Drobo5N2 User Guide 19

1.1.4.3 Using a Router or Switch with the Drobo 5N2

You will be plugging your Drobo 5N2 into a router or switch that must already be configured to work

with your network. Your router or switch must have at least one Ethernet port open and available.

Your router or switch must also support DHCP. If it does not, you will need to directly connect your

Drobo 5N2 to one of your computer’s Ethernet ports for the initial setup.

Tip:

To check for DHCP support, refer to the documentation for your router or switch. You may

also choose to proceed with installation and check for DHCP support only if you experience a

problem

For optimal performance, it’s best if your router or switch supports gigabit Ethernet connections

(1000 Mbit/s). Your Drobo 5N2, however, will auto-negotiate the highest connection speed available

to your router or switch.