User Manual

Drobo 5C User Guide 52

● In the Software Updates area of the Tools page, click the Check for Updates option.

● If needed, follow the same steps to ensure the Drobo 5C has the latest firmware.

3. Safely shut down the Drobo/Drobo S and the Drobo 5C. For steps, see Safely Shutting

Down Your Drobo 5C

4. Remove ALL drives from the Drobo or Drobo S and insert ALL drives into the Drobo

5C.

5. Turn the Drobo 5C back on by pressing its power toggle button.

The Drobo 5C may take a few minutes to boot up. When finished, all the data and

volumes will be available on the Drobo 5C as it was on the Drobo/Drobo S.

Note:

You can also follow these steps to migrate a disk pack from one Drobo 5C to

another Drobo 5C.