User Manual

Drobo 5C User Guide 23

4. Slide the drive into the drive bay, release the drive lock and push the drive into place

until you feel it connect.

The drive lock snaps behind the drive, securing it into place.

5. Insert additional drives in the same manner, following steps 2 through 4.

6. When finished, replace the bezel right side up, so that when your Drobo device is

turned on, you will be able to see the indicator lights. For more information on Indicator

lights, see Guide to meaning of indicator lights (LEDs. You are now ready to connect

cables and power on your Drobo device.

Next in the Setup for Your Drobo 5C

Connecting Cables on Your Drobo 5C

Return to Setting Up Your Drobo 5C