SDS

Heat, High temperatures
Use local and general ventilation. Ground/bond container and receiving equipment.
Only packagings which are approved (e.g. acc. to the Dangerous Goods Regulations) may be used.
See section 16 for a general overview.
These information are not available.
no data available
General ventilation.
Wear eye/face protection.
Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-
tightness/impermeability prior to use. In the case of wanting to use the gloves again, clean them before taking off and air
them well. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves men-
tioned above together with the supplier of these gloves.
Take recovery periods for skin regeneration. Preventive skin protection (barrier creams/ointments) is recommended.
Wash hands thoroughly after handling.
In case of inadequate ventilation wear respiratory protection.
Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.
Control of the effects
Protect against external exposure, such as
- Ventilation requirements
- Packaging compatibilities
7.3 Specific end use(s)
SECTION 8: Exposure controls/personal protection
8.1 Control parameters
Relevant DNELs/DMELs/PNECs and other threshold levels
8.2 Exposure controls
Appropriate engineering controls
Individual protection measures (personal protective equipment)
Eye/face protection
Skin protection
- Hand protection
- Other protection measures
Respiratory protection
Environmental exposure controls
Safety Data Sheet
acc. to 29 CFR 1910.1200 App D
Driven Two Pack Diffuser - Titanium Rain
Version number: 1.2 Date of compilation: 2016-04-21
United States: en
HS 413 SDS-02:
Page: 5 / 11