User`s manual

Introduction
- 2 -
 Intelligent and uninterrupted battery and AC power swap in real time
 Capture Video & Audio live from any composite video output
 Support MPEG-4/2 video format for longest record time
 Video Bit Rate : 1M~10Mbps
 Frame Rate : PAL(25fps), NTSC(30fps)
 Support PAL/NTSC/SECAM standard
 Resolution : Full-D1, CIF/SIF (1M Bitrates)
 Supports Single File & Full Disk Cycle Record Mode
 Supports ADPCM Audio Format
 Supports Volume Gain adjust of Microphone
 Audio Sampling : 8/16/32/48KHz
 On-board IR remote controller
 LANC remote controller support
 AC adapter or Internal Rechargeable Li-Ion Polymer Battery
 On-board battery charging circuit
 Offers power for camera & MIC
 Changeable CF Flash Card to save video
 Multi-Color LED for status
 Micro Vibration Motor (Optional) or Beep status warning
 Motion Detection support
 OSD and RTC
 Optional Lap Timer
 Optional GPS & G-Force
 Palm sized
 Only 160g weight with battery and CF card
 Video/Audio input
 Linux OS and upgradeable firmware
 Support Windows 98/ME/NT/2000/XP/Vista for Playback
1.5 Product and Accessories
DR3 1pcs
AC Power Adapter 1pcs
Recharge Li-ion Polymer Battery (Internal) 1pcs
IR Remote Control 1pcs
Network Sync Cable 1pcs
Multi-Connect/Lockable CAM/AV Adapter Cable 1pcs
Buckle for DR3 1pcs
External Beacon Receiver (Only for Lap Timer Edition) 1pcs
High Sensitivity GPS Antenna (Only for GPS Model) 1pcs
* Power adapter and battery are for DR3 only and don’t use any other power adapter
and battery instead in case of damage.