User`s manual

DR3 User’s Manual
- 57 -
7.7.4 Connection
Simply connect the External Beacon Receiver into the Beacon jack on the DR3 and
point the External Beacon Receiver to the Beacon. The Lap Timer will start to work
when Beacon signal is detected.
7.7.5 Mask Time
The Mask Timer is the time interval that DR3 doesn’t response after the detection of
Beacon & Split Beacon signal. The default value is 10 sec. If the time interval of twice
signal from Beacon & any Split Beacon emitter is small than Mask Time that you set,
the second signal will be ignored by DR3 .
When Split Beacon option is enabled, any Split Beacon emitter & standard Beacon
emitter will be similar as signal emitter.
Maybe you would like to display summary of Lap Timer information on screen after
recording video playback is finish when you replay video on PC.
Pick up Display Summary after Stop option to display all Lap Timer information on
screen after recording video finish playback.