User`s manual

DR3 User’s Manual
- 41 -
You can select Normal Record Mode option to enable normal record mode if current
configuration is cycle item.
If you want to use DR3-S1n a surveillance application, you can set the Record Mode to
Cycle Record mode.
7.3.4.2. Single File Cycle Record Mode
The DR3 has two cycle record modes, Single File Cycle Record & Full Disk Cycle
Record mode.
In Single File Cycle Record mode, the DR3 will save recordings in single file only, the
maximum size of single recording video file is 2GB, when video reaches the 2GB limit,
the system will save the new recordings from the begin of recording video file.
If your CF card is smaller than 2GB, the DR3 will save recording video in single file
only, when CF card is full, system will save the new recorded video from the beginning
of the recorded video file.
You can select Cycle (Single File) item in Record Mode option to enable Single File
Cycle Record mode.
7.3.4.3. Full Disk Cycle Record Mode
In Full Disk Cycle Record mode, the DR3 will record continually, when the CF card is
full, the DR3 will record the video overwriting the oldest recorded file.
You can select Cycle (Disk) item in Record Mode option to enable Full Disk Cycle
Record mode.