User`s manual

Configure DR3
- 40 -
7.3.3 Record on Power On
In some applications, you may need the DR3 to record automatically once the DR3-S1s
powered on.
You can switch on the Record on PowerOn option in the DR3 Configuration Menu or
enable Startup Record option on DR3 Desktop.
The default status of record is manual record via IR remote control, LANC remote
control or push button.
7.3.4 Recording Setting: Normal/Cycle Record, Key Frame & Record without
Audio
You can configure the DR3-S1n normal record or cycle record mode.
7.3.4.1. Normal Record Mode
In normal record mode, DR3 will record video & save recording video in multi-single
video file, the maximum size of single recording video file is 2GB depend on limit of
system.
The default of record mode is Normal Mode.