User`s manual

DR3 User’s Manual
- 25 -
7. Configure DR3
The DR3-S1s initialized as DEVICE.INI under the root directory of the CF card. It
must be in the root directory of CF card. The DR3 will use the last time configuration if
DEVICE.INI not found during startup.
DR3 Desktop can configure the video format, average bit rate, audio in, TV system,
time stamp, Beacon, convert the recording video etc.
7.1 Start-Up DR3 Desktop
DR3 Desktop will detect Network connection between DR3 & PC in first, if Desktop
can’t detect valid network connection, then it will detect CF card that you want to used
in DR3 , please connect CF card to PC via card reader before you start DR3 Desktop if
you don’t want to connect DR3 to PC via LAN.
The default sequence of DR3 Desktop is detecting valid network connection between
DR3 & PC in first, then detect CF card if it can’t find any valid net work connection.
Certainly, you can change the default detection method in DR3 Desktop software.
7.1.1 Startup Desktop software via Network Connection
Connect Network Sync cable that in package between DR3 & PC or switch/Router in
first, then double click to start-up DR3 Desktop.
DR3 Desktop will search valid network connection.
After DR3 Desktop detects valid network connection, it wills start-up successfully.