User`s manual

DR3 User’s Manual
- 17 -
4. DR3 Status
4.1 Status of DR3
☯ Power up: LED is yellow for less then 1 second.
☯ Self diagnostics: LED is red for about 10 seconds.
☯ Normal: LED is green. Means it is ready to record.
☯ Recording: red LED will flash about 6 times/second.
☯ CF full: yellow LED will flash.
☯ Battery Low: Recording is stopped automatically. LED flash 4 times and enters
sleep mode
☯ Standby: LED is yellow. Only the (POWER) button or LANC can wake it up.
☯ No Video: LED will slowly flash red whilst trying to record.
4.2 Preview System Information via Shortcut Key
When DR3 starts successfully, you can turn 3-Position switch to LEFT/RIGHT or
UP/DOWN to preview system information of DR3 .
4.2.1 DR3-S1
Turn 3-Position switch to LEFT once to display current date & time on DR3 .
Turn 3-Position switch to LEFT twice to display current output power voltage for
external camera.
Turn 3-Position switch to RIGHT once to preview current profile item & available
storage space on CF card that insert into DR3 .