User`s manual

Configuration DR3 using LCD Menu
- 174 -
select the parameter value & parameter area that you want to configure, and then press
button to save the configuration.
When you finish configuration, press button one or two times once to quit the LCD
configuration menu.
13.3.2.2 Configure Multi Channels DR3 using IR control
Once you enter LCD configuration menu, you can switch menu using & Key
on IR remote control, then press Key to select the menu/menu item which you
want to configure, using
Key to select the parameter value & parameter area
that you want to configure, and then press
Key to save the configuration.
When you finish configuration, press Key one or two times once until to quit the
LCD configuration menu.
13.3.3 LCD Configuration Menu Details
13.3.3.1 Menu
The valid menu of Multi-Channels DR3-S1s:
● 4 CH (3 CH / 2 CH)
● Menu Item – 4 CH / Layout
You can select any input camera to record when you use one camera input of all four
cameras that connected to 4CH DR3 . The CH_1, CH_2, CH_3 & CH_4 item mean
which camera that connect to appointed connector on 4CH DR3 . When you select any
channel that you want to record, 4CH DR3 will working as same as 1CH DR3 .
If you want to record 4 channel video at the same time, please select QUAD. The
recorded video will include 4 channel videos in one video file.
If you select more than one camera at the same time, you can select feat PIP display
mode for your application.