User`s manual

DR3 User’s Manual
- 169 -
Switch DOWN &UPposition of 3-Position switch or press Key to switch
No & Yes option, then press button or Key to save the current configuration,
press button or Key to quit the BEACON / As Split menu.
● Menu Item – BEACON / Splits
You can select the amount of Split Beacon for every loop; the maximum amount of
Split Beacon is four on every loop.
If you don’t use Split Beacon emitter on racing, please set the amount of Split Beacon
emitter to zero or disable Split Signal same as Beacon option directly.
The default configuration of the amount of Split Beacon is zero.
Switch DOWN & UP position of 3-Position switch or press Key to switch
amounts of split beacon from 0 to 4, then press button or Key to save the
current configuration, press button or Key to quit the BEACON / Splits
menu.
● Menu Item – BEACON / SysClock
The system clock of the DR3-X1 need to be calibrated for accurate time recording, it is
important for the Lap Timer. If you need to calibrate the system clock, press button
or Key to calibrate the system clock.