User`s manual

DR3 User’s Manual
- 161 -
Switch DOWN & UP position of 3-Position switch or press Key to select
feat output voltage for external camera, then press button or Key to save the
current configuration, press button or Key to quit the SYSTEM / CAM
VOLT menu.
● Menu Item – SYSTEM / PowerOff
To save the battery power, you can enable the DR3-X1 power off automatically depend
on the timer that you set.
The default status of Power-Off Timer is Disable.
Switch DOWN & UP position of 3-Position switch or press Key to
Disable Power Off or select feat timer (5/10/15 Minutes) depending on your actual
requirements, then press button or Key to save the current configuration, press
button or Key to quit the SYSTEM / POWEROFF menu.
● Menu Item – SYSTEM / LCD Off
To save the battery power, you can enable the DR3-X1 TFT LCD off automatically
depend on the timer that you set.
The default status of LCD OFF is disabling.