User`s manual

Configuration DR3 using LCD Menu
- 148 -
You may need press button or Key on IR remote control one or two times
once depend on your position in menu.
Once you enter the LCD configuration menu, the system will wait for you to select &
configure, if you don’t press any buttons, the system will quit the LCD configuration
menu after 10 sec automatically.
13.2.2 Configure DR3-X1
You can configure DR3-X1 in LCD menu via push switch/button or IR remote control.
13.2.2.1 Configure DR3-X1 using switch/button
Once you enter LCD configuration menu, you can switch menu using DOWN & UP
position of 3-Position switch, then press button to select the menu/menu item
which you want to configure, using DOWN & UP position of 3-Position switch to
select the parameter value & parameter area that you want to configure, and then press
button to save the configuration.
When you finish configuration, press button one or two times once to quit the LCD
configuration menu.
13.2.2.2 Configure DR3-X1 using IR control
Once you enter LCD configuration menu, you can switch menu using & Key
on IR remote control, then press Key to select the menu/menu item which you
want to configure, using Key to select the parameter value & parameter area
that you want to configure, and then press Key to save the configuration.
When you finish configuration, press
Key one or two times once until to quit the
LCD configuration menu.