User`s manual

Configuration DR3 using LCD Menu
- 144 -
If you use Split Beacon on racing, you must switch Split Signal Same as Beacon
option to enable it.
The default setting is No.
Switch LEFT & RIGHT position of 3-Position switch or press Key to
switch No & Yes option, then press button or Key to save the current
configuration, press
button or Key to quit the BEACON / As Split menu.
● Menu Item – BEACON / Splits
You can select the amount of Split Beacon for every loop; the maximum amount of
Split Beacon is four on every loop.
If you don’t use Split Beacon emitter on racing, please set the amount of Split Beacon
emitter to zero or disable Split Signal same as Beacon option directly.
The default configuration of the amount of Split Beacon is zero.
Switch LEFT & RIGHT position of 3-Position switch or press Key to
switch amounts of split beacon from 0 to 4, then press button or Key to save the
current configuration, press button or Key to quit the BEACON / Splits
menu.