User`s manual

DR3 User’s Manual
- 111 -
The default sequence of DR3 Desktop is detecting valid network connection between
DR3 & PC in first, then detect CF card if it can’t find any valid net work connection.
Certainly, you can change the default detection method in DR3 Desktop software.
11.2.1 Startup Desktop software via Network Connection
Connect Network Sync cable that in package between DR3 & PC or switch/Router in
first, then double click to start-up DR3 Desktop.
DR3 Desktop will search valid network connection.
After DR3 Desktop detects valid network connection, it wills start-up successfully.
The default IP address of DR3-S1s 192.168.0.152, please ensure your PC on same IP
segment for first connection. If yours PC & DR3 with different IP address segment,
Desktop software will prompt you.
You can change IP address of your PC to same IP segment with DR3 , such as
192.168.0.100, and then restart Desktop software again.
When you connect DR3 to your PC for the first time, please configure DR3 & PC as
follow: