User manual

Configure DVR
- 40 -
Connection
Simply connect the External Beacon Receiver into the Beacon jack on the DVR and
point the External Beacon Receiver to the Beacon. The Lap Timer will start to work
when Beacon signal is detected.
Mask Time
The Mask Timer is the time interval that DVR doesn’t response after the detection of
Beacon & Split Beacon signal. The default value is 10 sec. If the time interval of twice
signal from Beacon & any Split Beacon emitter is small than Mask Time that you set,
the second signal will be ignored by DVR.
When Split Beacon option be enabled, any Split Beacon emitter & standard Beacon
emitter will be as alike signal emitter.
Recording of Lap Time
The time of each lap is record in the DVR_xxx.txt file. The file will looks like:
Hostname
Team WORKGROUP
Sport Motor
Scene Security