User manual

DVR User’s Manual
- 19 -
Configure DVR
The DVR is initialized as DEVICE.INI under the root directory of the CF card. It must
be in the root directory of CF card. The DVR will use the last time configuration if
DEVICE.INI not found during startup.
DVR Desktop can configure the video format, average bit rate, audio in, TV system,
time stamp, Beacon, convert the recording video etc.
Start-Up DVR Desktop
DVR Desktop will detect CF card that you want to used in DVR, please connect CF
card to PC via card reader before you start DVR Desktop.
Connect CF card to PC via card reader in first, then double click to start-up DVR
Desktop.
DVR Desktop will search CF card on PC.
If CF card can’t be connected to PC correctly or no CF card be connected to PC, DVR
Desktop will display error message to prompt you connect CF card to PC correctly.