User manual

DVR User’s Manual
- 11 -
After the DVR starts successfully, the status LED on LANC remote control will display
green. Press the button on the center of LANC to start recording, and the status LED on
LANC will flash red & the unit beeps 3 times once started successfully.
Press button again, the DVR will stop recording, the status LED on LANC turns to
green.
Hold the button on LANC for approx 3 seconds untill the status LED on LANC flashes
red. This will power down the DVR, when the DVR powers down, the status LED on
LANC turns to yellow.
In power off status, press button on LANC to power up the DVR again.
NOTE : DO NOT PLUG OR UNPLUG LANC REMOTE CONTROL WHEN
DVR POWER ON & AC POWER ADAPTER IS CONNECTED !! YOU MUST
POWER DOWN THE DVR, UNPLUG AC POWER ADAPTER, THEN
PLUG/UNPLUG LANC REMOTE CONTROL.
Wireless Remote Control
Optional for specific applications with an additional module of wireless remote control.
Video Quality
1M: Record video using 1Mbits/s, record video based on CIF/SIF resolution.
EP: Record video using 2Mbits/s.
LP: Record video using 4Mbits/s.
SP: Record video using 6Mbits/s.
HQ: Record video using 8Mbits/s.
The recorded file size is dependent on the complexity of movement objects. The
following is the estimated recording time:
1M : 100 min/GB
EP : 60 min/GB
LP : 40 min/GB
SP : 20 min/GB
HQ : 15 min/GB
Larger storage cards can yields longer recording time and better picture quality. For
example, current capacities of CF card on the market are from 512MB to 16GB. 4GB
CF cards can record 4 hours in EP mode.
EP mode is recommended for slower moving or still background scene with some
moving objects in front. SP mode is recommended for fast moving background scenes.