User manual

Operation of DVR
- 10 -
7
8
Table showing numeric key on IR remote controller & Position menu
NOTE :
 Numeric key on the IR remote controller are used for 4 channel DVR
only.
 Numeric key on the IR remote controller are used only when you set
Layout to PIP on 4 Channel area.
LANC Remote Control
The DVR support multi-version LANC Remote Control, please power off DVR &
unplug AC Power adapter, then plug LANC remote control into LANC jack with
logo.
NOTE : SkyTools CamEYE SPORT LANC Remote Control V1.4 & V1.6 are supported by the
DVR.
Power on the DVR, after booting is finished, you can control the DVR start/stop
recording using LANC remote control. And you can power off DVR & power on it
again.