User manual

DVR User’s Manual

- 9 -

The flash frequency is about 3 times per second. Slower flash frequency means no

video signal is connected.

STOP

Press the (STOP) button for at least three seconds to stop recording. The LED

turns to green & you will hear 2 beeps.

It will take a short while to save buffered data after stopped. The power can not be turn

off until the LED changes to green. Early eject the CF card will cause destroy of video

file integrity. Disconnect AC power adapter and switch off battery before eject CF card.

Infrared Remote Control

Infrared remote control is optional for DVR.

Three buttons are defined currently:

Start recording

Stop recording

Keep pressing to make DVR in Sleep/Wakeup mode

Infrared Remote Control for 4 Channel DVR

The numeric key on the IR remote controller controls 9 positions of Picture-In-Picture,

you can configure it & select any one array method as your default array using the DVR

Configuration Utilities.

You can switch the array method using numeric key on the IR remote controller directly

when you record the video using 4 Channel DVR. The numeric key 1~9 is opposited

with 9 items in Position pull down menu.

Numeric Key on IR remote Controller Item in Position Menu