Specifications

5.3

Installing the servo unit optional board

-11

5.3.2 Procedure for installing the board for the 6.0 and 7.5 kW servo units

Install the optional board as follows:

1. Unscrew the screws that hold the optional board cover, and remove the cover.

2. Remove the blind plate NP.

3. Install the NPs on the optional board cover.

4. Install the optional board and secure it with the four screws.

5. Reinstall the optional board cover, and secure it with the screws.

オプションカバー

３

２

１

４

オプション基板

Optional board

cover