Specifications

Assembling and replacing
5.3.1
Procedure for installing the board for the 0.5-3.0 and 5.0 kW servo units
5
-10
5.3 Installing the servo unit optional board
5.3.1 Procedure for installing the board for the 0.5-3.0 and 5.0 kW servo
units
Install the optional board as follows:
1. Unscrew the screws that hold the optional board cover, and remove the cover.
2. Cut the blind plates off.
3. Install the NPs.
4. Install the optional board and secure it with the screws.
5. Reinstall the optional board cover, and secure it with the screws.
オプションカバー
４
オプション基板
１
２
３
Optional board
Optional board
cover