Specifications

Assembling and replacing
5.2.1
Procedure for replacing the 0.5-3.0 and 5.0 kW servo unit fans
5
-8
5.2 Replacing the servo unit fan
5.2.1 Procedure for replacing the 0.5-3.0 and 5.0 kW servo unit fans
Replace the servo unit fans as follows:
1. Open the PN cover.
2. Unscrew the screw that holds the fan unit. The screw will remain loosely attached to the
panel cover.
3. Remove the fan unit.
4. Disengage the connector.
5. Remove the fan from its fan cover, and install a new one.
コネクタ
ファンユニット
PNカバー
１
２
３
４
パネルカバー
PN cover
Fan unit
Connector
Panel cover
ファンカバー
ファンリード引出し口
ファンの向きに注意
（吐き出し方向）
5
Pay attention to the orientation of
the fan (air flow direction)
Fan cover
Cut-out for routing
the fan lead