Specifications

16.4
Analogue monitor
16
-11
16.4 Analogue monitor
You can monitor various signals by using analogue voltage.
To monitor analogue monitor signals, use a dedicated monitor cable (DE9404559) connected to
the connector shown below.
You can change analogue monitor signals by setting a user constant Pn003.
Pin No. Cable color Signal name
2
White Analogue monitor 1
1
Red Analogue monitor 2
3, 4
Black (2 pcs) GND (0 V)
Pn003.0 Analogue monitor 1 Factory default
setting: 2
Pn003.1
Analogue monitor 1
magnification
Factory default
setting: 0
Pn003.2
Analogue monitor 2 Factory default
setting: 0
Pn003.3
Analogue monitor 2
magnification
Factory default
setting: 0
CN6
CN2
CN8
CN1
RDY
CN5
A/B
SW1
YASKAWA
SERVOPACK
SGDK-50AEA
200V
3
12
4