Specifications

11.4
Error screen display and troubleshooting
11
-11
11.4 Error screen display and troubleshooting
11.4.1 Error screen display
There occurs an error, for example the drive is not powered on, or the communication with
the drive has failed, the screen will be shown as followings.
On this screen conditions, "Drive +", "Drive -", "Direct selection", "Search . . .", "Continue
search", and "Refresh" can not be enabled.
When the normal communication with all the drives is recovered, the screen automatically
comes back to the normal display.
The screen display remains unchanged until the communication with all the drives comes back to the
normal state.
However, by pressing the [Stop (F8)] key, you can forcedly terminate the communication waiting state.
Then you can Read/Write the parameter only for the drive(s) which has normal communication.
IMPORTANT