Specifications

Drive Parameter Screen
11.1.1
Startup
11
-2
11.1 Drive Parameter Screen Operation
This function allows you to indicate and edit the parameters of the drive which is connected to
YS 840DI via the drive parameter screen which is housed in YS 840DI standard HMI applica-
tion.
11.1.1 Startup
 Startup
To display the drive parameter screen, use the following procedure;
1. Select the [MENU SELECT] key to go to the Top tree.
2. Press the [>] key and the [Start up] key displays.
3. Click the [Start up] key.
4. Select the [Machine data] key from the bar as shown below.
5. Click the [Drive Parameter] key to display the drive parameter screen.