Specifications

9.3
Uploading hardware configuration
9
-21
• Rack
Specify the number (normally 0) of the rack in which a source CPU is contained.
• Slot
Specify the number (2 for the S7-300) of the slot in which the source CPU is inserted.
• Address
Specify the node address (normally 2) of the source CPU.
4. Click on the OK button, and the hardware configuration information of the source CPU
will be uploaded.
For the network communication module and some FM modules, the information they have
themselves is not uploaded.
9.3.2 Uploading hardware configuration (2)
The other method by which you can upload the hardware configuration information of a
CPU to a project is this:
1. Click on the Upload icon of the hardware configuration screen.
2. As the open project screen appears, select a destination project to which the hardware
configuration information is to be uploaded, and click on the OK button.
Note that this method is applicable only when a destination project already exists (a new
project cannot be created by this method).
INFO
アップロードする
CPU
のノードアドレス
Node address of a
source CPU
アップロードする
CPU
のラック番号
Number of the rack in which a source
CPU is contained
アップロードする
CPU
のスロット番号
Number of the slot in which a source
CPU is inserted
ハードウェアコンフィグレーション画面より
Hardware configuration screen
①
②
③