Specifications

SIMATIC manager and hardware configuration

9.2.10

DP slave (ET200) construction and addressing

-14

9.2.10 DP slave (ET200) construction and addressing

The I/O details of a DP slave are shown in the rack details window at the bottom of the hard-

ware configuration screen. Edit the I/O details as follows:

1. Click on the icon of a DP slave node you want to edit.

2. The rack details window appears showing the rack configuration of the selected node.

3. For the ET200M and other nodes that require module configuration, select an I/O mod-

ule from the hardware catalog and move it into the rack details window, as is the case

for the CPU rack. With the ET200M rack, insert modules in slot 4 or later slots.

For ET200B and other slaves whose I/O configuration is automatically determined

when they are selected, this step may be skipped.

4. Double-click on a slot in the rack details window to display the properties screen. Then

specify a start address.

②

②②

②

①

①①

①

Click on a DP slave node

ラックの詳細ウィンドウのス

ロットを指定してモジュール

をダブルクリック、

あるいはモジュールを選択し

てドラッグアンドドロップ

Select a target slot and

double-click on a module, or

drag and drop a module into

a target slot.

③

③③

③

Rack details window