Specifications

9.2
Defining the hardware
9
-11
9.2.8
CPU’s DP port setting
When a CPU provided with a DP port is inserted in a slot, the DP port properties screen
automatically appears.
To manually display the screen, double-click on the DP-Master line under a CPU with a DP
port.
1. Select a PROFIBUS network through which the selected CPU is connected.
2. To create a new network, click on the New button to display the network properties
screen. To check or modify the properties of an existing network, click on the Proper-
ties button.
3. Select a PROFIBUS type.
4. Select a transmission rate according to the total cable length for the network:
• 3-12M bps : 100 m max.
• 1.5M bps : 200 m max.
• 500K bps : 400 m max.
5. Click on OK, and you will return to the DP port properties screen.
6. Specify a unique number between 1 and 126 as the CPU’s PROFIBUS network address.
7. Click on OK.
①
①①
①
②
②②
②
ノードアドレス
Node address
接続するネットワーク
Target network
Transmission rate
selection
PROFIBUS
タイプ
PROFIBUS type
④
④④
④
⑥
⑥⑥
⑥
PROFIBUS node
properties screen
③
③③
③
⑤
⑤⑤
⑤