Specifications

9.2
Defining the hardware
9
-5
9.2.2 Adding a station
Add a station as follows (assuming a S7-300 station is to be added):
1. Select a project by left click, and display a submenu by right click.
In this submenu, select Insert New Object > SIMATIC 300 Station.
2. S7-300 station named SIMATIC 300 Station (1) is created under the project. The name
can be changed freely.
Now you are ready for hardware configuration.
When adding a station, if you select Insert New Object > S7 program, a program container is created
under the project. The container contains programs but no hardware configuration. If blocks created
here are downloaded to the CPU, they are automatically transferred to the CPU whose MPI node
address is 2.
④
④④
④
⑤
⑤⑤
⑤
右クリックでサブメニューを開き、
Insert New Object →
SIMATIC 300 Station 選択
Select a project by left click, and display a
submenu by right click.
Then select Insert New Object
→
SIMATIC 300 Station.
INFO