Product Manual

14. Use caution if stimulation is applied over the menstruating or pregnant uterus.
15. Use caution if stimulation is applied over areas of skin that lack normal sensation. The user manual
should advise users of the following:
- Keep this device out of the reach of children.
- Use this device only with the leads, electrodes and accessories recommended by the
manufacturer.
16. Do not use TENS anywhere on the head or face (unless instructed by your therapist for TMJ), front of
the neck, internally, or on genitals.
ADVERSE REACTIONS
You may experience skin irritation and burns beneath the stimulation electrodes applied to your skin. You
may experience headache and other painful sensations during or following the application of electrical
stimulation near your eyes and to your head and face; and you should stop using the device.
TROUBLESHOOTINGS
1. The REMOTE is not turning on or I can’t see anything on the screen.
- Make sure the REMOTE has been fully charged.
2. The indicator light of RECEIVER becomes red.
- Charge the RECEIVER soon or it will turn off automatically.
3. The REMOTE and/or RECEIVER do(es) not seem to be charging.
- Ensure the USB cable is firmly in the REMOTE/RECEIVER on one side and plugged into the
AC adapter into the electrical socket on the other side - Isolate whether there is a problem
with the AC adapter by plugging the USB cable from the REMOTE/RECEIVER into a computer.
4. Adhesive electrode pads do not stick to skin even after cleaning and moistening their surface.
- Replace the adhesive gel pads. Pads can be purchased from your distributor or from
www.drivemedical.com.
5. During use the skin feels a painful burning sensation or the stimulation becomes weakened.
- Apply a few drops of water to adhesive surface of the pads and make sure the pads are pressed
firmly to the skin during application.
6. When pressing ‘M’ (Mode) and (+) (-) (Intensity adjustor) of the REMOTE, there is no any reaction.
- Make sure both REMOTE and RECEIVERS are turned on, and the Channel number matches the
RECEIVER number correctly.
7. The REMOTE can’t control the RECEIVER well.
- Make sure the distance between the REMOTE and RECEIVER is less than 10 meters under the
open environment.
- 12 - - 13 -