Product Manual
The more you push - the LOWER “DOWN” the Intensity level of the Channel shown in the LCD display goes.
CHANNEL and RECEIVER CONTROLS
There are 2 RECEIVERS labeled 1 and 2.
*RECEIVER 1 is Channel 1 and RECEIVER 2 is Channel 2.
Both Channels/Receivers are controlled by the REMOTE. To use Channel 1 push the ‘C’ button on the
REMOTE until you see 1 under the ‘C’ in the LCD display. Then set the MODE, by pushing ‘M’ on the
REMOTE to see 1, 2, 3, 4 in the LCD display. To use Channel 2 push the ‘C’ button on the REMOTE
until you see 2 under the ‘C’ in the LCD display. Then set the MODE for it by pushing ‘M’ on the
REMOTE to see 1, 2, 3, 4 in the LCD display.
*Note: Receiver must be connected to either 1 large or 2 small electrodes to function. Using only 1
small electrode will result in non-function.
MODES - PRE-PROGRAMMED MODE FUNCTIONS
Once the correct Channel/Receiver is chosen by pushing ‘C’ and seeing 1 or 2 appear in the LCD display,
push the ‘M’ button on the REMOTE to change the selected Channel from Mode 1, to Mode 2, to Mode 3 or
to Mode 4.
Suggested MODE Uses for Treatment
Mode 1: Legs, Arms, Hands, Feet, Knees, Lower Back, Hips, Stomach, Shoulders, Upper Back, Neck
Mode 2: Lower Back, Shoulders, Upper Back, Neck
Mode 3: Legs, Arms, Hands, Feet, Knees, Lower Back, Hips, Stomach, Shoulders, Upper Back, Neck
Mode 4: Combination Wave Mode, a mixture of Modes 1, 2 & 3.
APPLICATION DURATION
2-3 treatments per day, 45 minutes treatment times, over 10 days for one course.
ELECTRODE PLACEMENT
The placement of electrodes can be one of the most important parameters in achieving success with TENS
therapy. Of utmost importance is the willingness of the user to try the various styles of electrode placement
to find which method best fits his or her needs. Every user responds to electrical stimulation differently and
their needs may vary from the conventional settings suggested here. If the initial results are not positive,
- 6 - - 7 -
Channel
Mode
Mode
Channel