Technical data

PowerStroll Owner’s Handbook Page 8 of 8 Part Code: Z24000
Compatibility with Drive Wheelchairs
The PowerStrolls are compatible with following
Drive wheelchairs:
Budget Steel Wheelchairs
(product codes: CS1142SP and CS1142TS)
Steel Chair Wheelchairs – self propel
(product codes: SSP16, SSP18, SSP18E and SUSP18)
Steel Chair Wheelchairs – transit
(product codes: STS16, STS18, STS18E and SUTS18)
Lightweight Aluminium Wheelchairs
(product codes: LAWC001 and LAWC002*)
Standard Aluminium Wheelchairs
(product codes: XSAWCSP18, XSAWCTS18*,
XSAWCSP20 and XSAWCTS20*)
Super Deluxe Wheelchairs
(product codes: XSSDSP16/18/20 & XSTS16/18/20*)
Spirit Wheelchairs (product code: XSES18)
* The wheelchairs marked with ‘*’ will require
the attendant brake levers and cable
removing from the wheelchair prior to use.
The actual brake unit can still be used as a
parking brake with these parts removed.
The above list is current at time of printing, and the
omission of a Drive wheelchair from this list does not
mean that the PowerStroll is incompatible with it.
For more information please contact your local Drive
Medical dealer.
Compatibility with Other Wheelchairs
The PowerStroll is suitable for most folding wheelchairs:
• with a distance between tubing edges (W) of
14½ ” to 20” (37cm – 50cm). This is usually, but
not always, the same as the wheelchair seat
width
• a round tubing diameter
(D) between 7/8” -
1” (22mm – 25mm)
w
D
Please note that you should check with your dealer
and/or the wheelchair manufacturer. Drive Medical
does not accept any responsibility for other
manufacturer’s wheelchairs, and in some
circumstances a risk assessment should be carried
out prior to installation.
Manufacturer Details
Drive Medical Ltd,
Ainley’s Industrial Estate,
Elland, GB HX5 9JP.
 [phone]
 [e-mail]
 www.drivemedical.co.uk