3 POI liner termite D574 IMPORTANT SAFETY GUIDELINES PERIODICALLY INSPECT ALL PARTS AND REPLACE AS NEEDED ยป OCCUPANT WEIGHT SHOULD NOT EXCEED 250 1BS.
ASSEMBLY INSTRUCTIONS: 1. Remarque back assembly (C) from unembarrassed chair and aside momentarily. 2. Slide the 1 piece back assembly (C) into the square tubes the lower frame assembly (8} so that the holes in the back rest line op with the holes located on horizontal brace of te lower {mare assembly (B). PV Push Bar {Jj Hades in Backrest 3.
OPERATING INSTRUCTIONS: Articulating headrest may be adjusted to devised position by pulling forward or ashing back. Articulating Headrest {F) Operating Instructions for PVC Pu sit Hardin Blow Balded Ladle To Operate; 1. Underneath each arm, pull down and hold pule button (Fig.2 A& B) and slide lockout keys forward on both sides (D), Table {C) Lt Pull Butter: (B} 2. Pick up fable by circular table arm Right Pl and side into receiving lubes i front of Bottom (A) sate arm. Out 3.
