Product Manual

76
Chapter 7 : REPLACABLE PARTS
The replaceable parts and accessories of EMS devices are as given below –
Except leads, electrodes and battery, battery case cover, please do not try to re-
place the other parts of a device.
PARTS
01 ELECTRODES LEADS
02 ELECTRODES
03 9V BATTERY ,TYPE 6F22
04 BELT CLIP
05 BATTERY CASE COVER
06 LEAD CONNECTOR
07 MAIN PCB
08 INTENSITY KNOB
09 CONTRACTION KNOB
10 RELAXATION KNOB
11 PULSE WIDTH KNOB
12 PULSE RATE KNOB
13 RAMP KNOB
Chapter 8 : ACCESSORIES
Each set AMS-4 EMS are completed with standard accessories and standard
label as given below
I. Accessories
REF. NO. PRODUCT Q’TY
AGF-101 40 X 40 MM Adhesive Electrodes 4 pieces
AGF-110 Electrodes Leads 2 pieces
9 V Battery 1 piece
Instruction Manual 1 piece
Carrying Case x 1 EA 1 piece
Chapter 6 : TECHNICAL SPECIFICATION
The technical specification details of AMS-4 EMS are as follows.
MECHANISM TECHNICAL DESCRIPTION
01. Channel Dual, isolated between channels.
02. Intensity Control Adjustable, 0-80 mA peak into 500 ohm load
each channel
03. Wave Form Asymmetrical Bi-Phase Square Pulse
04. Voltage 0 to 34 V (Load : 500 ohm)
05. Power Supply One 9V battery
06. Size 95(H) x 65(W) x 23.5(T) mm
07. Weight 115 grams with battery
08. Pulse Rate Adjustable, from 2 to 150 Hz
09. Pulse Width Selectable 100uS, 200uS, and 300 uS
10. Contraction Time Adjustable from 1-30 seconds
11. Relaxation Time Adjustable from 1-45 seconds
12. Ramp Time Adjustable from 1-8 seconds
13. Max. Charge per pulse 20 micro-coulombs
14. Battery Life Approximately 25 hours at nominal settings.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com