Product Manual
6 7
Chapter 6 : TECHNICAL SPECIFICATION
The technical specification details of AGF-6X DIGITAL DIGITAL EMS are as
follows.
MECHANISM TECHNICAL DESCRIPTION
01. Channel Dual, isolated between channels.
02. Intensity Control Adjustable 0-90mA, Max output 90mA peak to
peak (17.8mA rms) into 500ohm load each
channel.
03. Wave Form Asymmetrical Bi-Phase Square Pulse
04. Voltage Adjustable 0-45V, Max output 45V peak to peak
(8.9V rms) into 500ohm load each channel.
05. Power Supply One 9V battery.
06. Size 10cm (L) x 6 cm(W) x 2.1cm(H)
07. Weight 120 grams with battery
08. Pulse Rate Adjustable, from 1 Hz to 150 Hz
09. Pulse Width Adjustable, from 30 uS to 260 uS
10. Contraction Time Adjustable from 1 - 30 seconds
11. Relaxation Time Adjustable from 1 - 30 seconds
12. Ramp Time Adjustable from 1 - 6 seconds
13. Timer Adjustable : 1 - 60 minutes.
14. Max. Charge per pulse 20 micro – coulombs
15. Battery Life Approximately 25 hours at nominal settings
Chapter 7 : REPLACABLE PARTS
The replaceable parts and accessories of DIGITAL EMS devices are as given
below –
Except leads, electrodes and battery, battery case cover, please do not try to re-
place the other parts of a device.
PARTS
01 ELECTRODES LEADS
02 ELECTRODES
03 9V BATTERY ,TYPE 6F22
04 BELT CLIP
05 BATTERY CASE COVER
06 LEAD CONNECTOR
07 MAIN PCB
08 INTENSITY KNOB
Chapter 8 : ACCESSORIES
Each set AGF-6X DIGITAL EMS are completed with standard accessories and
standard label as given below
I.Accessories
REF. NO. PRODUCT Q’TY
AGF-101 40 X 40 MM Adhesive Electrodes 4 pieces
AGF-111N Electrodes Leads 2 pieces
9 V Battery 1 piece
Instruction Manual 1 piece
Carrying Case 1 piece
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com