Product Manual

22 23
Chapter 21 MALFUNCTIONS
Should any malfunctions occur while using the DIGITAL EMS, check
- whether the controls or parameters are set to the appropriate form of therapy.
Adjust the control correctly.
- whether the cable is correctly connected to the device. The cables should be
inserted completely into the sockets.
- whether the LCD reveal the menu. If necessary, insert a new battery.
- for possible damage to the cable. Change the cable if any damage is detected.
* If there is any other problem, please return the device to your distributor. Do
not try to repair a defective device.
Chapter 22 Conformity to Safety Standards
STATEMENT OF EMC
The AGF-6X Digital EMS devices are in compliance with IEC 60601-1-2: 1993.
CONFORMITY TO MDD REQUIREMENTS
The AGF-6X Digital EMS devices are in compliance with IEC60601-1 safety
standard and FDA 510K standards.
Chapter 23 : WARRANTY
All AGF-6X Digital EMS models carry a warranty of one year from the date
of delivery. The warranty applies to the stimulator only and covers both parts
and labour relating thereto.
The warranty does not apply to damage resulting from failure to follow the
operating instructions, accidents, abuse, alteration or disassembly by unautho-
rized personnel.
Manufacturer:
Drive Medical Design & Manufacturing,
99 Seaview Boulevard
Port Washington, NY 11050
Phone # : [phone]
Edition : V1.2
Printed in July , 2005
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com