Product Manual
16 17
4.Lead Connector
Connection of the electrodes is made with two-lead connector. The device must
be switched off before connecting the cables. Both intensity controls must be at
the Off position. Electrodes must be pressed firmly on the skin.
5. Function Selector
Expose the controls by sliding front cover down from top of unit. This button
Controlling the menu on the LCD. When the button is pressed, it can change
menu from contraction time, relaxation time, ramp time, pulse rate, pulse width
to timer.
The parameter of each function can be adjusted when it is revealed on the menu.
6. Parameter Increase Control
This button controlling the increase of parameter. When pressing this button,
the parameter will increase. Press the button until the value desired is reached.
7.Parameter Decrease Control
This button controlling the decrease of parameter. When pressing this
button, the parameter will decrease. Press the button until the value desired
is reached.
8.Function Indicator
The drawing on the top of LCD showing the function that is working.
Each part of the drawing represents one function of the course.
Ramp Up
Contraction
Ramp Down
Relaxation
The defined area will flash when the device is working on that function.
9. Step to Set Parameter
The parameter of a treatment course can be adjusted according to the following
steps.
Press “set” button to select the function you wish to set a value.
a. Turn on the Intensity
After the electrodes are placed firmly on skin and the lead wires are plugged in
the socket of device, turn the on/off control clockwise. The menu will reveal on
LCD. Notice the indication of power and function on the LCD.
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com