Product Manual

76
Chapter 7 : REPLACABLE PARTS
The replaceable parts and accessories of DIGITAL SD TENS devices are as
given below –
Except leads, electrodes and battery, battery case cover, please do not try to
replace the other parts of a device.
PARTS
01 ELECTRODES LEADS
02 ELECTRODES
03 9V BATTERY, TYPE 6F22
04 BELT CLIP
05 BATTERY CASE COVER
06 LEAD CONNECTOR
08 MAIN PCB
09 INTENSITY KNOB
Chapter 8 : ACCESSORIES
Each set AGF-5X TENS are completed with standard accessories and
standard label as given below
I.Accessories
REF. NO. DESCRIPTION Q’TY
AGF-101 40 X 40 mm Adhesive Electrodes 4 pieces
AGF-111N Electrodes Leads 2 pieces
9 V Battery 1 piece
Instruction Manual 1 piece
Carrying Case 1 piece
Chapter 6 : TECHNICAL SPECIFICATIONS
The technical specification details of AGF-5X DIGITAL SD TENS are as follows.
MECHANISM TECHNICAL DESCRIPTION
01. Channel Dual, isolated between channels
02. Pulse Ampulitude Adjustable, 0-80 mA peak into 500 ohm load
each channel.
03. Wave Form Asymmetrical Bi-Phasic Square Pulse
04. Voltage 0 to 34V (Load: 500 ohm)
05. Power source One 9 Volt Battery. (Alkaline, or nickel-
cadmium rechargable)
06. Size 100 (H) x 60(W) x 21 (T) mm
07. Weight 120 grams with battery.
08. Pulse Rate Adjustable, from 1 Hz to 150 Hz.
09. Pulse Width Adjustable, from 30 to 260 microseconds.
10. Timer Selectable, 15, 30 and 60 minutes.
11. Burst Mode Pulse rate adjustable from 0.5 Hz to 5Hz.
Pulse width (adjustable), frequency fixed=100 Hz,
Max output voltage 5 V rms (13 mA rms) or 80
mA Peak to Peak into 500 ohm load.
12. Modulation Mode Pulse Width is automatically varied in cycle
pattern.
Mode Amplitude Width Rate Time
(mA) (uS) (Hz)
M Adj. Setting Adj. 10
(0-80) (30-260) (-40%)
S1 Setting Setting Setting 10
(0-80) (- 40%) (1-150)
S2 Setting Setting Setting 9
(0-80) (-70%) (1-150)
13. Max. Charge Per Pulse 20 micro-coulombs
PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com