Product Manual

OPERATING INSTRUCTIONS

INITIAL POSITIONING AND INSTALLATION

1. Select a suitable location for the unit near a 120 VAC / 230VAC, grounded power

Outlet.

2. Grasp handle on top of cabinet and position the unit so that operating controls are

Accessible to the user and back of unit is away from wall.

3. Make certain that the power switch located in the center of the control panel is in the

OFF position and plug power cord into grounded power outlet or grounded adapter.

4. Be certain that all connections to outlet ( i.e. tubing , nebulizers , etc.) are snug and

not leaking aerosol.

5. When used in conjunction with mist tents, etc., place unit outside of tent and place unit

at a level below discharge end of the delivery tubing.

OPERATION

1. Press Power On/Off switch to ON position.

2. To check the pressure that the compressor is delivering occluded outlet or

connect equipment you intend to use with the compressor . Pressure can be

adjusted with regulator and observing pressure gauge as follows :

a. Pull regulator knob out to unlock adjustment.

b. Turn dial of regulator to desired pressure.

-clockwise – increase pressure

-counterclockwise – decrease pressure

c. Push knob towards unit locking regulator pressure.